Ödeme & teslimat koşulları:
|Ürün adı:||Kalibrasyon Bloğu||Türü:||V2 (A4) Bloğu|
|Malzeme:||1018 karbon çeliği, LY12 / 6063/7075 alüminyum, 304 paslanmaz çelik||Standart:||BS 2704 blok A4, Şekil 4 ve AS 2083, DIN54122|
|Boyutlar:||75 mm x 43 mm x 12.5 mm||Ambalaj:||ABS mühendislik plastikleri|
Ultrasonic Calibration Block for on-site checking of miniature shear wave probe index, time base, beam angle and gain
Calibration blocks is an important supplementary material in the Ultrasonic testing, used to calibrate the sensitivity of the ultrasonic flaw detector and ultrasonic probe. Our testing block is certificated by the authority of the state depeartment. Our products include: domestic standards UT blocks, European standard UT block, NDT block, hexagonal testing block, and so on. Processing of the special specifications UT block
12.5mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 2.5mm and 50 mm radius, 1.5mm hole (or 3mm or 5mm), engraved reference mark scales from 35 to 75 degrees. In accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083.
Dimensions: 75mm x 43mm x 12.5mm
Net Weight:0.5kg Gross Weight:0.75kg Approximate Weight( Carbon Steel)
Made from 1018 carbon steel, or LY12/6063/7075 aluminum, or 304 stainless steel.
Also available in 20mm and 25mm thicknesses for calibration of non-miniature probes.